HP 2000 Self-Heated Gold Probe



Why an HP2000 self-heated oxygen sensor?

There are certain applications where an in situ oxygen probe is impractical. For those applications Super Systems, Inc. recommends the HP2000 self-heated oxygen probe. This system supplies the temperature required to make an oxygen probe function. For some applications such as a multi-tube generator, or a rotary retort furnace, this probe will allow you to extract a continuous sample of the atmosphere stream and pass it by a standard oxygen probe.

Applications
  • Rotary Furnaces
  • Sample line extended into furnace beyond quench chute
  • Opposite-end from atmosphere introduction
  • Adequate filter system
  • Conservative addition of enriching gas
  • Modular endothermic generator
  • Manifold "sample" lines
  • Allow for condensation drip
  • Fixed sample lines
  • Use natural gas as "oxygen getter"
  • Low temperature applications
  • Nitrogen-based low temperature, miscellaneous protective atmospheres
  • %Oxygen in residual combustion gases.
  • Manual "shut-off" valves are suggested
  • Sintering/Muffle furnaces
  • No need for high temperature probes

 

7205 EDINGTON DR. CINCINNATI, OH 45249 PHONE: 513.772.0060     FAX: 513.772.9466