Universal Temperature Controller with Timer Ideal for temper/draw applications where analog timers are used Logic inputs used with push buttons for very easy-to-use interface Automatically download set point and time from SuperDATA Universal Temperature Control Auto-tuning Adaptive tuning Communications Modbus Profibus Input logic 3 digital inputs Alarms Deviation Band threshold  Absolute threshold 1/8 DIN - 48x96 mm 6 Outputs 4 Relay  2 Analog Update time: 50 ms • Stand alone timer (count down) • Ability to pause and change value at anytime • Ability to reset at anytime • Timer tied to an optional logic input to start time • Timer complete tied internally to a logic and/or    relay output for cycle complete  • Example 1- Timer is manually started when load is    put in to furnace and does not stop counting down    until time is expired. • Example 2- Timer Starts when Process Variable    comes within temperature band and does not stop    until time is expired. • Example 3- Timer Starts when Process Variable    comes within a predefined temperature band of    Setpoint. Timer pauses the count-down when    Process Variable falls outside of band,    and continues counting down again when the    Process Variable falls back inside of band.

7205 EDINGTON DR. CINCINNATI, OH 45249

PHONE: 513.772.0060     FAX: 513.772.9466