Main FAQ Page -- SSi Website

 

How do I connect to XGA Viewer software?

SSi recommends using the included USB cable as follows:

 

  1. On your PC, open the installed XGA Viewer (make sure your PGA is also turned on).

  2. Using the provided USB cable, connect the B Connector to the “Client” port on the side of the PGA and the A connector to the PC.

  3. In XGA Viewer select “Options” > “Instruments set up.”  This will open a Configure Analyzers window.

  4. On the bottom select “Add.” Here you can name the instrument and enter its serial number.

  5. Click the blue “Scan” button to scan the Network for your PGA.

  6. When the scan is completed you should see the PGA appear.  Click on it.

  7. You will be returned to the Configure Analyzers window.  Click “Save.”